- Home
- ยป
- Our Products
- »
- Stainless Steel Flat Bar
Stainless Steel Flat Bar
EN Series Steel Round Bars
Material Grade | EN SERIES |
Single Piece Length | 6 meter |
Usage/Application | FOR ALL |
Shape | Round |
Size | AS PER CLIENT NEEDED |
Surface Finish | Galvanized |
Comprehensive stocks are held in a wide range of Alloy Tool steel specifications. British Standard and International specifications available. Our most popular grades are listed below;
Carbon and Alloy steel specifications:
EN8
0.4% medium carbon steel. A general purpose steel for applications requiring added strength and superior tensile properties to mild steel specifications.
EN9
0.5% carbon steel giving higher tensile than EN8. Can be induction or flame hardened.
EN19
1% chromium molybdenum high tensile steel. Suitable for highly stressed applications where greater strength is required.
??? EN24
Nickel chromium molybdenum high tensile steel. Has good wear and shock resistance and is suitable for tensile ranges up to 1550 N/mm2.
EN30B
41/4% nickel steel. Achieves a good through hardness with air or oil hardening. It is capable of taking a good polish and is widely used as a plastic mould steel.
EN31
High carbon alloy steel which achieves a high degree of hardness with compressive strength and abrasion resistance.
EN36
Nickel chromium case hardening steel. Give a very hard surface with a strong core and retaining a high degree of toughness.
EN45
Silicon mangenese alloy spring steel.
EN47
Tough oil quenching spring steel which, when heat treated, offers good wear resistance.
SAE 8620
A low alloy case hardening steel.
AISI 4140
Chromium molybdenum high tensile steel. Supplied 18-22HRc
(Hardness Rockwell)
AISI 4145
Chromium molybdenum high tensile steel similar to 4140.
Supplied 30 36HRc
AISI 4130
Chromium molybdenum steel supplied 18-22HRc. Lower carbon content that AISI 4140.
AISI 6150
A chromium vanadium spring steel type steel.
EN Series Bars
Material Grade | EN SERIES |
Single Piece Length | 6 meter |
Usage/Application | FOR ALL |
Shape | Round |
Surface Finish | Polished |
Comprehensive stocks are held in a wide range of Alloy Tool steel specifications. British Standard and International specifications available. Our most popular grades are listed below;
Carbon and Alloy steel specifications:
??? EN8
0.4% medium carbon steel. A general purpose steel for applications requiring added strength and superior tensile properties to mild steel specifications.
??? EN9
0.5% carbon steel giving higher tensile than EN8. Can be induction or flame hardened.
??? EN19
1% chromium molybdenum high tensile steel. Suitable for highly stressed applications where greater strength is required.
??? EN24
Nickel chromium molybdenum high tensile steel. Has good wear and shock resistance and is suitable for tensile ranges up to 1550 N/mm2.
??? EN30B
41/4% nickel steel. Achieves a good through hardness with air or oil hardening. It is capable of taking a good polish and is widely used as a plastic mould steel.
??? EN31
High carbon alloy steel which achieves a high degree of hardness with compressive strength and abrasion resistance.
??? EN36
Nickel chromium case hardening steel. Give a very hard surface with a strong core and retaining a high degree of toughness.
??? EN45
Silicon mangenese alloy spring steel.
??? EN47
Tough oil quenching spring steel which, when heat treated, offers good wear resistance.
??? SAE 8620
A low alloy case hardening steel.
??? AISI 4140
Chromium molybdenum high tensile steel. Supplied 18-22HRc
(Hardness Rockwell)
??? AISI 4145
Chromium molybdenum high tensile steel similar to 4140.
Supplied 30 36HRc
??? AISI 4130
Chromium molybdenum steel supplied 18-22HRc. Lower carbon content that AISI 4140.
??? AISI 6150
A chromium vanadium spring steel type steel.
Alu Flat Bar
Usage/Application | FOR ALL |
Being a Stockiest Supplier Exporter, we maintain close links with diverse Vendor; the Company as vertically Consolidated holding with high self-sufficiency in Stainless Steel, ferrous § Nonferrous metal production i.e. Industrial raw materials in all size, grades and forms, which enables the company to be one of the largest participants of the metal market through its affiliates, we also ensure to Supply only quality products include sheet, coil, rod, pipes, flats, wide § Scap that are as per Specific requirement of the client. We have an effective communication channel that helps us to sustain equilibrium between our suppliers and Client and thus remain in the best position to deliver the product within the stipulated time frame. I always an eye on serving our customer requirements in the most cost-efficient way possible. Magmite Steel & Alloys motto has been delivering quality products to the customer delight & not just manufacturing products. Magmite Steel & Alloys provide high-quality material at worldwide such as superalloy, nickel alloy, Hastelloy C276 Inconel 600/625/718 titanium alloy, Duplex steel 31803/2205, Super Duplex F53(32750) / F55(32760) Stainless Steel 422/440C, A286 Alloy, XM-19, etc and has more than 500 grades as per client requirement. Magmite Steel & Alloys have also developed as one of the domestic and international suppliers. We welcome enquiries from everyone as we are more likely to be able to do quotes for you. We are not irritated by unusual and are always devoted to providing new facilities to the client. A favorable response from your side is highly obliged
Monel 500 Round Bar
Shape | Round |
Material | Stainless Steel |
Usage/Application | Construction |
Diameter | 10 mm |
Stainless Steel Round Hollow Bar
Usage/Application | FOR ALL |
Size | AS PER REQUIREMENT. |
Material | Stainless Steel |
Unit Length | AS PER REQUIREMENT. |
Stainless Steel Flat Bar
Minimum Order Quantity: 60 Kg
Shape | Square |
Material | Stainless Steel |
Surface Finish | Polished |
99.95% Pure Mo Molybdenum Foil Sheet Plate
S.S 316 ANGLE
Mirror Sheet S.S.Sheets
Hairline Colour Stainless Steel Sheet
BERYLLIUM COPPER PLATES
BRASS FLAT BAR
HIGH SPEED STEEL BAR
Usage/Application | FOR ALL |
Shape | ROUND BAR |
Single Piece Length | 3-6 METER & AS PER REQUIRMENT |